|Opcode/Instruction||Op/En||64-Bit Mode||Compat/Leg Mode||Description|
NP 0F 2D /r
CVTPS2PI mm, xmm/m64
|RM||Valid||Valid||Convert two packed single-precision floating-point values from xmm/m64 to two packed signed doubleword integers in mm.|
|Op/En||Operand 1||Operand 2||Operand 3||Operand 4|
|RM||ModRM:reg (w)||ModRM:r/m (r)||NA||NA|
Converts two packed single-precision floating-point values in the source operand (second operand) to two packed signed doubleword integers in the destination operand (first operand).
The source operand can be an XMM register or a 128-bit memory location. The destination operand is an MMX tech-nology register. When the source operand is an XMM register, the two single-precision floating-point values are contained in the low quadword of the register. When a conversion is inexact, the value returned is rounded according to the rounding control bits in the MXCSR register. If a converted result is larger than the maximum signed doubleword integer, the floating-point invalid exception is raised, and if this exception is masked, the indef-inite integer value (80000000H) is returned.
CVTPS2PI causes a transition from x87 FPU to MMX technology operation (that is, the x87 FPU top-of-stack pointer is set to 0 and the x87 FPU tag word is set to all 0s [valid]). If this instruction is executed while an x87 FPU floating-point exception is pending, the exception is handled before the CVTPS2PI instruction is executed.
In 64-bit mode, use of the REX.R prefix permits this instruction to access additional registers (XMM8-XMM15).
DEST[31:0] := Convert_Single_Precision_Floating_Point_To_Integer(SRC[31:0]); DEST[63:32] := Convert_Single_Precision_Floating_Point_To_Integer(SRC[63:32]);
__m64 _mm_cvtps_pi32(__m128 a)
See Table 22-5, “Exception Conditions for Legacy SIMD/MMX Instructions with XMM and FP Exception” in the Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 3B.